From your scanner to a walkthrough, with one step that is yours.

Export, upload, and let the processing run. What comes back is a finished tour you can download or share.

01
Export from your scanner software
Register the project as you normally would, then export an E57 with imagery. Leica Cyclone REGISTER 360 writes one spherical panorama per setup. Trimble RealWorks and Faro SCENE write the E57 and a panorama set beside it. A Matterport MatterPak contains an E57 and six cube faces per sweep. All of these are accepted as they come.
02
Upload
Create a project, give it a name and an address, and drop in the E57 and the panorama folder. A PDF or image floor plan is optional; it is used only as an aligned overlay in the top-down view. The upload is checked before anything is charged: setup count, image count, and whether every setup has its imagery.
03
Processing
Each setup becomes a single equirectangular panorama with depth. Floors are detected, with stair setups joined to the nearest level. The point cloud is cleaned of stray points, recolored from the panoramas, thinned into streaming chunks with a coarse whole-building set under 15 MB, and the viewer is assembled with your floor plan if you supplied one. There is nothing for you to do during this step.
04
Download or share
When the tour is ready you get an email. The project page offers the folder for download and a hosted link with a QR code. Both come from the same build; you can use either or both, and you can come back for the folder at any time while the project is hosted.

Scanners and exports

Any software that writes a standard E57 with per-setup imagery works. If yours is not listed, send a small sample through the contact page and we will test it.

Scanner	Software	What to upload
Leica RTC360, BLK360, P-series	Cyclone REGISTER 360 PLUS	E57 with embedded imagery (one spherical panorama per setup)
Trimble X7, X9, X12	Trimble RealWorks or Perspective	E57 plus exported panorama set
Faro Focus series	Faro SCENE	E57 plus exported panorama set
NavVis VLX, M6	NavVis IVION export	E57 plus panorama set
Z+F IMAGER series	Z+F LaserControl	E57 plus exported panorama set
Topcon GLS series	MAGNET Collage	E57 plus exported panorama set
XGRIDS Lixel L2 Pro, K1	LixelStudio	E57 plus exported panorama set
Matterport Pro2, Pro3	MatterPak	E57 plus cube-face panoramas

What you get back

The folder

index.html on top, a data subfolder underneath. Double-click to open on a desktop. It streams the point cloud and panoramas from the folder itself, so a 100,000 sq ft building stays quick.

The hosted tour

A link and a QR code. Phone-first, installable, with Save for offline. Hosting is optional and comes with the two larger plans; the folder is yours either way.